Release Notes Documentation ProjectID and ProjectTaskID added to /api/v1/InventoryIssue API endpoint "ProjectID" and "ProjectTaskID" fields have been added to the POST v1/InventoryIssue API endpoint Populating the Branch field in the Project endpoint/GET requests Earlier, the Branch field was not populated in the Project endpoint/GET requests. This has now been fixed.  -GET/api/v1/project/{projectID}  -GET/api/v1/project/internal/{internalID}  -GET/api/v1/project  -GET /api/v1/project/tasks Endpoint POST api/v1/supplierinvoice/action/release now fully supports background-api operation Endpoint POST api/v1/supplierinvoice/action/release now fully supports background-api operation by specifying header erp-api-background on the request. Earlier, the operation was also started as a background operation, but wrongfully posted the webhook callback as soon as the operation started, whereas now it is posted on completion of the release process. Unit of measure (UOM) ignored in the Project transaction/POST request Earlier, the unit of measure (UOM) was ignored and defaulted to HOUR in the Project transaction endpoint/POST requests. This has now been fixed.     API - Due dates for breaking changes Release Notes Documentation Due Default expand toggle values in GET KitAssembly endpoint to be set to FALSE instead of TRUE Expand toggle values that are currently set to TRUE by default will be changed to FALSE by default. May 1, 2024 Planned removal of VNI authentication method We are extending the deadline for phasing out VNI authentication method from December 31st 2023 til latest June 1st 2024. ISVs should register their (existing) integrations in the Developer Portal and use Connect authentication instead before the stated end date. Benefits of this change: - One preferred method of authentication across Visma.net ERP portfolio - Better security using scopes - Let customer be more in control (customer grants access explicitly) More information for ISVs on how to migrate existing integrations and\or setup new integrations can be found in the international developer community: https://community.visma.com/t5/News-in-Developers-Visma-net/Visma-net-ERP-APIs-are-now-available-for-Visma-Connect/ba-p/542148 Jun 01, 2024 Planned removal of Sales Order API endpoints We plan to be functionally complete by Q3-2024 (30th of September 2024), thus new due date being end of Q4-2024(31st of December 2024). If any change would occur for this, we will announce that as soon as possible, A number of Sales Order API endpoints will be removed as a part of the transition to the next generation ERP. The following API endpoints will be removed: GET /controller/api/v1/salesorder/{orderNbr} GET /controller/api/v1/salesorder/{orderType}/{orderNbr} GET /controller/api/v1/salesorder/{orderType}/{orderNbr}/rotrut GET /controller/api/v1/salesorder GET /controller/api/v1/salesorder/{orderType}/{orderNbr}/commissions POST /controller/api/v1/salesorder POST /controller/api/v1/salesorder/{saleOrderNumber}/action/cancelSalesOrder POST /controller/api/v1/salesorder/{salesOrderNumber}/action/reopenSalesOrder PUT /controller/api/v1/salesorder/{orderNbr} GET /controller/api/v1/salesorderbasic/{orderNbr} GET /controller/api/v1/salesorderbasic/{orderType}/{orderNbr} GET /controller/api/v1/salesorderbasic POST /controller/api/v1/salesorderbasic PUT /controller/api/v1/salesorderbasic/{orderNbr} POST /controller/api/v2/salesorderbasic POST /controller/api/v2/salesorder POST /controller/api/v2/salesorder/{saleOrderNumber}/action/cancelSalesOrder POST /controller/api/v2/salesorder/{salesOrderNumber}/action/reopenSalesOrder All functionality currently missing in the new Sales Order Service API will be added before these endpoints are removed. The list of affected endpoints will also be extended, so pay attention to future updates. For more information on how to use the Visma.net ERP Sales Order Service, please visit: https://community.visma.com/t5/News-in-Developers-Visma-net/Getting-started-with-the-first-neXtGen-service-Visma-net-ERP/ba-p/401436 Swagger for Visma.net.ERP.SalesOrder.API https://salesorder.visma.net/swagger/index.html Dec 31, 2024 ... Vis mer

Release Notes Documentation Improved performance on Discount and  Discount V2 endpoints for GET operation The performance on Discount and Discount V2 endpoints for GET operation has been improved.  This will be available for pilot customers first POST / PUT "LandedCost > Currency" via  Purchase Receipt Endpoint API POST / PUT "LandedCost > Currency" via  Purchase Receipt Endpoint API     API - Due dates for breaking changes Release Notes Documentation Due Default expand toggle values in GET KitAssembly endpoint to be set to FALSE instead of TRUE Expand toggle values that are currently set to TRUE by default will be changed to FALSE by default. May 1, 2024 Planned removal of VNI authentication method We are planning to phase out VNI authentication method by the end of 2023. ISVs should register their (existing) integrations in the Developer Portal and use Connect authentication instead before the stated end date. Benefits of this change: - One preferred method of authentication across Visma.net ERP portfolio - Better security using scopes - Let customer be more in control (customer grants access explicitly) More information for ISVs on how to migrate existing integrations and\or setup new integrations can be found in the international developer community: https://community.visma.com/t5/News-in-Developers-Visma-net/Visma-net-ERP-APIs-are-now-available-for-Visma-Connect/ba-p/542148 Dec 31, 2023 Planned removal of Sales Order API endpoints We plan to be functionally complete by Q3-2024 (30th of September 2024), thus new due date being  end of Q4-2024(31st of December 2024). If any change would occur for this, we will announce that as  soon as possible,  A number of Sales Order API endpoints will be removed as a part of the transition to the next generation  ERP.  The following API endpoints will be removed:  GET /controller/api/v1/salesorder/{orderNbr}  GET /controller/api/v1/salesorder/{orderType}/{orderNbr}  GET /controller/api/v1/salesorder/{orderType}/{orderNbr}/rotrut  GET /controller/api/v1/salesorder  GET /controller/api/v1/salesorder/{orderType}/{orderNbr}/commissions  POST /controller/api/v1/salesorder  POST /controller/api/v1/salesorder/{saleOrderNumber}/action/cancelSalesOrder  POST /controller/api/v1/salesorder/{salesOrderNumber}/action/reopenSalesOrder  PUT /controller/api/v1/salesorder/{orderNbr}  GET /controller/api/v1/salesorderbasic/{orderNbr}  GET /controller/api/v1/salesorderbasic/{orderType}/{orderNbr}  GET /controller/api/v1/salesorderbasic  POST /controller/api/v1/salesorderbasic  PUT /controller/api/v1/salesorderbasic/{orderNbr}  POST /controller/api/v2/salesorderbasic  POST /controller/api/v2/salesorder  POST /controller/api/v2/salesorder/{saleOrderNumber}/action/cancelSalesOrder  POST /controller/api/v2/salesorder/{salesOrderNumber}/action/reopenSalesOrder  All functionality currently missing in the new Sales Order Service API will be added before these  endpoints are removed. The list of affected endpoints will also be extended, so pay attention to future  updates.  For more information on how to use the Visma.net ERP Sales Order Service, please visit:  https://community.visma.com/t5/News-in-Developers-Visma-net/Getting-started-with-the-first-neXtGen-  service-Visma-net-ERP/ba-p/401436 Swagger for Visma.net.ERP.SalesOrder.API  https://salesorder.visma.net/swagger/index.html Dec  31,  2024 Dec 31, 2024   ... Vis mer

Scheduled for  Mar  13 ,  01:00  -  04:30  CET   Maintenance window next week Tuesday-Wednesday night. We will be doing right sizing on our SQL environment. Visma.net ERP UI and API will be unavailable during this time.   This scheduled maintenance affects: Visma.net ERP (Visma.net ERP, Visma.net ERP API) and Visma.net ERP neXtGen Services (Visma.net ERP Sales Order Service, Visma.net ERP Payment Service, Visma.net ERP Sales Order Service UI, Visma.net ERP Journal Transaction Service, Visma.net ERP DataMart Service, Visma.net ERP Inventory Optimization Service). ... Vis mer

Release Notes Documentation Create/update customer via Customer endpoint with account and subaccount restrictions fixed Earlier, you could not create or update a customer via the Customer endpoint with account and subaccount restrictions. This has now been fixed for the following endpoints: - POST /api/v1/customer - PUT /api/v1/customer/{customerCd} - PUT /api/v1/customer/internal/{internalID} This will be released only for pilot customers at first. POST/PUT via Supplier endpoint not allowing certain combinations of account and subaccount to be used when restricted combination would be met during the call Earlier, you could not create or update a supplier via the Supplier endpoint with account and subaccount restrictions in place. The issue took place in a scenario where the account and subaccount starting values from the default supplier class would come across a restricted combination during the insert of new values. Error denied the call if a restricted combination was recognised, while updating the fields from the defaults to new values. This has now been fixed for the following endpoints: - POST /api/v1/Supplier - PUT /api/v1/Supplier/{supplierCd} This will be released only for pilot customers at first.     API - Due dates for breaking changes Release Notes Documentation Due Default expand toggle values in GET KitAssembly endpoint to be set to FALSE instead of TRUE Expand toggle values that are currently set to TRUE by default will be changed to FALSE by default. May 1, 2024 Planned removal of VNI authentication method We are planning to phase out VNI authentication method by the end of 2023. ISVs should register their (existing) integrations in the Developer Portal and use Connect authentication instead before the stated end date. Benefits of this change: - One preferred method of authentication across Visma.net ERP portfolio - Better security using scopes - Let customer be more in control (customer grants access explicitly) More information for ISVs on how to migrate existing integrations and\or setup new integrations can be found in the international developer community: https://community.visma.com/t5/News-in-Developers-Visma-net/Visma-net-ERP-APIs-are-now-available-for-Visma-Connect/ba-p/542148 Dec 31, 2023 Planned removal of Sales Order API endpoints We plan to be functionally complete by Q3-2024 (30th of September 2024), thus new due date being end of Q4-2024(31st of December 2024). If any change would occur for this, we will announce that as soon as possible, A number of Sales Order API endpoints will be removed as a part of the transition to the next generation ERP. The following API endpoints will be removed: GET /controller/api/v1/salesorder/{orderNbr} GET /controller/api/v1/salesorder/{orderType}/{orderNbr} GET /controller/api/v1/salesorder/{orderType}/{orderNbr}/rotrut GET /controller/api/v1/salesorder GET /controller/api/v1/salesorder/{orderType}/{orderNbr}/commissions POST /controller/api/v1/salesorder POST /controller/api/v1/salesorder/{saleOrderNumber}/action/cancelSalesOrder POST /controller/api/v1/salesorder/{salesOrderNumber}/action/reopenSalesOrder PUT /controller/api/v1/salesorder/{orderNbr} GET /controller/api/v1/salesorderbasic/{orderNbr} GET /controller/api/v1/salesorderbasic/{orderType}/{orderNbr} GET /controller/api/v1/salesorderbasic POST /controller/api/v1/salesorderbasic PUT /controller/api/v1/salesorderbasic/{orderNbr} POST /controller/api/v2/salesorderbasic POST /controller/api/v2/salesorder POST /controller/api/v2/salesorder/{saleOrderNumber}/action/cancelSalesOrder POST /controller/api/v2/salesorder/{salesOrderNumber}/action/reopenSalesOrder All functionality currently missing in the new Sales Order Service API will be added before these endpoints are removed. The list of affected endpoints will also be extended, so pay attention to future updates. For more information on how to use the Visma.net ERP Sales Order Service, please visit: https://community.visma.com/t5/News-in-Developers-Visma-net/Getting-started-with-the-first-neXtGen-service-Visma-net-ERP/ba-p/401436 Swagger for Visma.net.ERP.SalesOrder.API https://salesorder.visma.net/swagger/index.html Dec 31, 2024   ... Vis mer

Release Notes Documentation SupplierSubaccount now exposed in Supplier endpoint  You are now able to GET/POST/PUT the supplier ledger subaccount in the Supplier endpoint. The Supplier ledger sub field is available as supplierSubaccount. See the swagger documentation for more information. GET Supplier endpoint not displaying details on supplierPaymentMethodDetails correctly Earlier, there was a bug in GET Supplier endpoint in regards to supplierPaymentMethodDetails. This has now beens fixed and supplierPaymentMethodDetails are displayed based on paymentMethod.     API - Due dates for breaking changes Release Notes Documentation Due Default expand toggle values in GET KitAssembly endpoint to be set to FALSE instead of TRUE Expand toggle values that are currently set to TRUE by default will be changed to FALSE by default. May 1, 2024 Deprecated fields on Account endpoint Following fields are deprecated and will be removed on 20th of February 2024:  - ExternalCode1  - ExternalCode2  - AnalysisCode They should be replaced by fields: ExternalCode1Info, ExternalCode2Info, AnalisysCodeInfo, which contain more details. Feb 20, 2024 Planned removal of VNI authentication method We are planning to phase out VNI authentication method by the end of 2023. ISVs should register their (existing) integrations in the Developer Portal and use Connect authentication instead before the stated end date. Benefits of this change: - One preferred method of authentication across Visma.net ERP portfolio - Better security using scopes - Let customer be more in control (customer grants access explicitly) More information for ISVs on how to migrate existing integrations and\or setup new integrations can be found in the international developer community: https://community.visma.com/t5/News-in-Developers-Visma-net/Visma-net-ERP-APIs-are-now-available-for-Visma-Connect/ba-p/542148 Dec 31, 2023 Planned removal of Sales Order API endpoints We plan to be functionally complete by Q3-2024 (30th of September 2024), thus new due date being end of Q4-2024(31st of December 2024). If any change would occur for this, we will announce that as soon as possible, A number of Sales Order API endpoints will be removed as a part of the transition to the next generation ERP. The following API endpoints will be removed: GET /controller/api/v1/salesorder/{orderNbr} GET /controller/api/v1/salesorder/{orderType}/{orderNbr} GET /controller/api/v1/salesorder/{orderType}/{orderNbr}/rotrut GET /controller/api/v1/salesorder GET /controller/api/v1/salesorder/{orderType}/{orderNbr}/commissions POST /controller/api/v1/salesorder POST /controller/api/v1/salesorder/{saleOrderNumber}/action/cancelSalesOrder POST /controller/api/v1/salesorder/{salesOrderNumber}/action/reopenSalesOrder PUT /controller/api/v1/salesorder/{orderNbr} GET /controller/api/v1/salesorderbasic/{orderNbr} GET /controller/api/v1/salesorderbasic/{orderType}/{orderNbr} GET /controller/api/v1/salesorderbasic POST /controller/api/v1/salesorderbasic PUT /controller/api/v1/salesorderbasic/{orderNbr} POST /controller/api/v2/salesorderbasic POST /controller/api/v2/salesorder POST /controller/api/v2/salesorder/{saleOrderNumber}/action/cancelSalesOrder POST /controller/api/v2/salesorder/{salesOrderNumber}/action/reopenSalesOrder All functionality currently missing in the new Sales Order Service API will be added before these endpoints are removed. The list of affected endpoints will also be extended, so pay attention to future updates. For more information on how to use the Visma.net ERP Sales Order Service, please visit: https://community.visma.com/t5/News-in-Developers-Visma-net/Getting-started-with-the-first-neXtGen-service-Visma-net-ERP/ba-p/401436 Swagger for Visma.net.ERP.SalesOrder.API https://salesorder.visma.net/swagger/index.html Dec 31, 2024   ... Vis mer

As an API user I want to be able to remove incorrect barcode references. As of today (version 9.80.0) I can only update a specific cross reference for a specific inventory. ... Vis mer

As an API user I want to be able to add extended cost to a sales order line. As of current version 9.78 I'm not able to add this through the API endpoints for salesOrder. This includes both v2 and v3 of the endpoint. This field is available through the UI and would help some of our internal integrations from OneStop ... Vis mer

As an API user I want to be able to add term start and end date to a sales order line. As of current version 9.78 I'm not able to add this through the API endpoints for salesOrder. This includes both v2 and v3 of the endpoint. This field is available through the UI and would help a few integrations that are reliant on this field. ... Vis mer