avbryt
Viser resultater for 
Søk heller etter 
Mente du: 
Mine områder

Logg inn eller registrer en ny bruker

for å automatisk få tildelt relevante områder i Mine områder.

Brukertips i Visma.net Payroll

Sorter etter:
Unions If you have employees who are members of a union, you must establish the union in Employees / Settings / Unions. Click on "Add union" to add a new union.   The following values can/must be filled in: Number: Fill in a number on the union if you want to use one. Name: Fill in the name of the union. Address: Touch "Add" to enter the address. (It will appear on the union report) E-mail adress: Tap "Add" to enter email address. Phone Number: Touch "Add" to enter the phone number. Payment method: Choose between "Bank file" and "Manual". If a bank file is selected, the payment of the union client will be included in the file for Autopoay. Bank Account Number: Must be filled in if payment method "Bank File" is specified. Use reference number from: Here you choose wether to use reference number from Union or Employment. Union reference number: Must be filled in if payment method "Bank File" is specified. Entitled to tax deductions: Here it is stated whether the union's trait for this union should reduce the employees' basis for tax or not. Fee percentage: If the quota is to be deducted in percent, fill in this here. For example, 5% is value 5. Minimum fee: If it is not to be deducted less than a given amount, enter this limit here (applies to the percentage deduction). Maximum fee: If no more than a given amount is to be deducted, fill in this limit here (applies to the percentage deduction). Fixed fee: If a fixed amount is to be deducted, register it here. Collective insurance amount: If collective insurance is to be part of the union, you can fill in this value here (the value can also be overridden on each employee). Unions insurance amount: If other insurance is part of the union, you can fill in this value here (the value can also be overruled on each employee).   Press "Continue" and then "Save" at the bottom of the page to save the union.  
Vis hele artikkelen
19-07-2019 10:09
  • 0 Svar
  • 0 Liker
  • 711 Visninger
The tax collectors Unlike Creditors, tax collectors are municipalities who submit claims to employees in your company. Tax collectors must also be registered in your system in order to be associated with the employees. Employees / Settings / Tax collectors There are no predefined municipalities in the system. This must therefore be created manually. The municipalities are mainly used for creditor payment to municipalities, or Outlay deduction - tax and fee. Click on "Add" and fill in required fields to add a new Municipality: Municipality: Select municipality from the drop-down menu. Bank account numbers for each municipality are predefined and appear automatically. Type of deduction: This is automatically set to Pull Out - Tax and Tax, and is not possible to change. Address: The field is optional. Click "Add Address" if you wish to enter it. Phone: The field is optional. Click "Add Phone" if you wish to enter it.  
Vis hele artikkelen
19-07-2019 09:26
  • 0 Svar
  • 0 Liker
  • 699 Visninger
Creditors Creditors are external and possibly internal companies and institutions with requirements for the employees of your company. These must be registered in the system in order to obtain an automatic deduction from the salary of the individual employee. NAV Collection center/innkrevingssentral Outlay - Legal offenses Outlay - Claims by State enterprises These creditors are not possible to change or delete. To add new creditors, click the "Add" button on the right. A new window opens and you need to fill in the following information: Name: Enter a name for the creditor. The field is obligatory. Bank account number: If it is to be paid automatically to the creditor, account number must be entered. Overdue balance: If you tick off in this field, any negative balance will be transferred to the next period. Type of deduction: All new creditors will get the Other category. This field is not possible to change. The field is used to categorize the creditors when linking the individual creditor and the deduction to the employee later.   Once the information on the creditor is stored, you will only see a line of some information about the creditor. To see all the information on the creditor, you can click the arrow to the right to expand the image.  
Vis hele artikkelen
19-07-2019 09:12
  • 0 Svar
  • 0 Liker
  • 708 Visninger
Once the company is created and the payroll manager is assigned roles, you can begin to set up the actual system. To make this easier for you as a payroll manager, you will be guided through an onboarding wizard where you can set up most of the settings required for the solution to work fully. We recommend filling in as much information as possible in this, but it is also possible to fill in / change the information in the various services later. The boarding wizard will automatically appear when you enter the Employees service. Here is an overview of the steps in the onboarding wizard and what the different fields mean. At the bottom of the article you will also find a PDF document that refers to where to find the different fields in the system. Step 1: Welcome. Step 2: Company. Here, some of the company settings are defined. Address: Click "Add" to add the company address, if desired. Phone: Click "Add" to add the company phone number, if desired.   Company contact person: Enter the contact information. The fields are mandatory. Company logo: Here you can enter the logo that will be shown on the payslip in Visma.net Payroll.    Business sub-unit Name: Enter a name for the business sub-unit. This is a mandatory field, and therefore a business must be registered with the company. Bussiness number: Enter the bussiness number of the sub-unit. If you do not know what the sub-unit's number is, you can look up the organization number in the Brønnøydundsregistrene (https://www.brreg.no/), and look at "overview of registered sub-units". You can also find this information in the Brønnøysund Register Center. Start-up month A-message: Define which month you want the system to start sending A-messages. The field can be changed later as long as no A messages have been sent yet. After the first A-message has been sent, it is no longer possible to change the field. Type of business: This field is shown as ordinary, and is unchangeable at this point in time.   NOTE! If you have several businesses (locations) in the same company, you must create all the businesses. Click "Add" to add more businesses.   Bank information Create bank file: If you are using Visma Auto pay, and have a bank agreement, you can check this box for Payroll to automatically create a file for automatic salary payments. If checked it is mandatory to add the bank account from which the payments should be sent from. Bank salary: Click add, to define bank salary account number. Bank guarantee for tax: Check this box if you have a bank guarantee for tax. If not you need to split tax into a seperate bank account, it is then mandatory to fill in that account number here in that case. Payment of unpaid tax: Here you can choose between monthly and bi - monthly payment. Half tax: Here you may choose if you want to remove half tax in November or Desember.   Step 3: Company Calendar Transfer of attendance and absence to Payroll:  Here you can choose if attendance and absence registration done by employees should be registered in Payroll automatically, or if they have to be approved first. Inclusive Workplace (IA): Specify whether or not the company is an IA company. This has, among other things, an impact on absence in Absence and payment in Payroll. If your company practices the IA rules even if you are formally not an IA company, you must set YES here to make it right in relation to the self-reporting days in Visma.net Calendar.   National holidays: Here you choose if the national holidays are days off or normal work days.   Step 4: Wage run. This step will create first wage run with a default payout date. The system later creates ongoing pay slips with the same payout date as stated in this image.   Wage run title: Title of the wage run, standard is "Månedslønn." Pay out date: Day of month when salary is being paid. Pro rata method: Here you can choose if en employee beginning or ending work in the middle of a month, or gets a change to payment should be calculated per calender days or work days. Difference threshold: Here you choose the percentage (0-100) for which Payroll wage runs will be used to present deviations compared to previous wage run results.   Chart of Accounts: There are three different possibilities for the chart of accounts in the system, one of which allows you to set up a completely separate account register. If you want to use the predefined charts of accounts, you can choose between "Norwegian standard chart of accounts" and "Mamut standard chart of accounts".   NOTE: If you select the Norwegian Standard Chart of Accounts or Mamut Standard Chart of Accounts, you will receive this message: Click save anyway to continue.   Altinn: Here you will set up Altinn credentials. You need to choose default report step, and fill in computer system ID and computer system password.   Step 5: Accounting. During this step you have the opportunity to view / add account and make changes to account types.   Accounts: If you have selected "Norwegian Standard Chart of Accounts" or "Mamut Standard Accounts Chart", the accounts will be synchronized and updated automatically. You do not need to enter your own accounts if the selected account set covers the accounts you want. If you still need multiple accounts, you can enter them under "Accounts". Account types: Account type is a new term that appears in Payroll. This is a way of defining salary types so that if you later If you change the general ledger account for salary, you can change the account on the account types so that this is updated for all salary types related to this particular type of account. We recommend that you read more about the account typers in the tutorial.   NOTE! If you use Visma.net Financials, the integration account requires the accounts to be found in both systems. Some of the accounts used in Visma.net Payroll do not exist in Visma.net Financials - these must be created manually in Visma.net Financials in order for the accounting file from Visma.net Payroll to be transferred without errors. To add new accounts, click "Add account" under the accounts field. ID: Enter the desired account number. Maximum length is 40 characters. It is important that this account number is the same as that used in the accounting system, if not the transfer will push through to the accounting system with errors. Name: Enter the desired name for the account. Maximum length is 60 characters. Properties: Specify whether to use the account for amounts, number, or both. Account valid from: By default, the validity dates of the account are set without a specific date. That means, the account will be valid at any time. If you want to specify a validity period, click "In use from / to" and specify the start and / or end date.   NOTE: Here we recommend that you look over the proposal that the account is linked to the correct account type.   Accounting information: Here you will choose adjustment account and export file format.    Step 6: Dimensions.  In this step you can enter your cost carriers, or dimensions as it is called in Payroll. Dimension definitions are type of cost carrier, while dimension values are the different values of the cost bearers. Eg. You can add the dimension value "Department" and enter the different departments under "Dimension values".   If you use Visma.net Financials or have had Visma.net Expense from earlier, dimension definitions and dimensions will be transferred to the onboarding wizard. If you do not use Visma.net Financials, you will create your own dimension definitions manually by pressing "Add dimension definition"   Id: Specify which Id to use for the definition. Maximum length is 10 characters. The field is obligatory. Name: Enter the name of the dimension definition type. Maximum length is 30 characters. The field is obligatory. Is numeric: Specify whether the dimension values ​​(the different cost carriers) are numeric or not. Select order: The priority that the priority order should have. The order is used in the payroll itself, and specifies where Payroll should start looking for dimensions. Eg. Payroll will first see if there is a dimension on the actual transaction. If there are no values ​​here, it further looks at the position of each employee. If this is also blank, it will search for dimensions of the type of salary that have been used. Possible choices are: Transaction Position Paycode Transaction Paycode Position Dimension definition valid from: By default, the validity dates are set for dimensional definition without specific date. That means, the dimension definition will be valid at any time. If you want to specify a validity period, click "In use from / to" and start and / or end date.   Furthermore, you create dimension values ​​by clicking "Add dimension definition"   Step 7: Finish All the steps in the Onboardingswizards are now complete. Click "Save" to exit the wizard. Congratulations, you are now done with the onboarding wizard and hopefully have filled in most of the settings. You are now ready to use the system. Click on Save to move forward. If there are settings you have not known at the time you went through the onboarding wizard, or there are settings you want to change or add, this must be done before adding employees. The onboarding wizard you will automatically take you to Employees / Overview. It is in this picture that you create the employees, but we recommend that you look through Company settings first. Much of the company settings are already defined in the onboarding wizard, but there are a couple of registry entries in Company settings that may be useful to look at.
Vis hele artikkelen
18-07-2019 12:07
  • 0 Svar
  • 1 Liker
  • 997 Visninger
Rapporter du kan ta ut i Expense
Vis hele artikkelen
07-02-2018 12:13 (Sist oppdatert 16-07-2019)
  • 0 Svar
  • 0 Liker
  • 1398 Visninger
Når en ansatt skal registrere i kalenderen, vil mulige valg være arbeidstid og fravær. Hvilke alternativer som kommer opp avhenger av hvilke koder for arbeidstid og fravær som ligger i systemet.
Vis hele artikkelen
15-12-2017 15:12 (Sist oppdatert 15-07-2019)
  • 0 Svar
  • 0 Liker
  • 1375 Visninger
Godkjenningsprosessen i Calendar sier noe om flyten i godkjenningsprosessen når en ansatte legger inn arbeidstid eller fravær. Det ligger to ulike typer godkjenningsprosesser i Calendar. 
Vis hele artikkelen
07-07-2017 14:05 (Sist oppdatert 30-04-2019)
  • 0 Svar
  • 0 Liker
  • 1542 Visninger
Ansatte kan nå få utbetalt reiseoppgjør fra Visma.net Expense på egen bankkonto. Du registrerer reisekonto på de ansatte under fanen Person i Employees.   Klikk + under Tilleggskontoer.     Angi når kontoen skal tas i bruk, legg inn navn på kontoinnehaver og kontonummer. I feltet Betalingsmetode velger du Lønnsart og i feltet Lønnsart velger du 901150 Expense utbetalinger .   Alle standard Expense lønnsarter er definert med Expense bankkonto i fanen Generell informasjon under Innstillinger | Lønnsarter i Payroll. Dersom du har egendefinerte lønnsarter som du bruker i Expense, må du huke av Bankkonto for Expense på disse.   I lønnskjøringen vil utbetalingen til reisekonto vises på egen linje øverst til høyre.   I tillegg vises det en egen linje for overføring til reisekonto på lønnsslippen til den ansatte.      
Vis hele artikkelen
24-09-2020 16:09
  • 0 Svar
  • 0 Liker
  • 352 Visninger
Av sikkerhetsmessige årsaker er 2FA (tofaktorautentisering) i AutoPay gjort obligatorisk fra 01.01.2020 for alle nye Payroll kunder som betaler gjennom AutoPay. For kunder på  Visma.net Payroll innebærer dette at de må bruke Google Authenticator for å godkjenne bankbetalinger som skal sendes til banken.   I første omgang vil alle nye kunder/bankavtaler bli aktivert med 2FA som standard. Planen er at alle Payroll kunder skal flyttes over på 2FA i løpet av 1. halvår   Alle nye selskaper/firmaer vil som standard ha hake i feltet “Aktiver totrinnskontroll for Visma.net AutoPay” under Admin | Firmaer.   Når 2FA er aktivert på selskapet, kan bruker med rollen AutoPay Administrator, velge hvilket trinnet som skal utløse totrinns godkjenning. Du kan velge mellom opplasting, ved godkjenning eller både ved opplasting og godkjenning.     Bare ved godkjenning Kun den som godkjenner betalingen bruker 2FA. Lønnsansvarlig sender betaling til Autopay og Godkjenner må bruker bruke Google Authenticator for å godkjenne betaling.   Bare ved opplasting Kun den som sender betalinger fra Payroll bruker 2FA. Lønnsansvarlig må bruke Google Authenticator for laste opp betalingen til Autopay. Denne flyten krever at lønnsansvarlig (betaler) har rollen Autopay Uploader.   Både ved opplasting og godkjenning Både den som sender og den som godkjenner bruker 2FA. Først må lønnsansvarlig  godkjenne opplastninge via Google Authenticator, og deretter må godkjenner gjøre det samme. Denne flyten krever at lønnsansvarlig (betaler) har rollen Autopay Uploader. Relaterte brukertips: Hvordan opprette en Autopay-avtale  
Vis hele artikkelen
13-02-2020 11:11
  • 0 Svar
  • 1 Liker
  • 1075 Visninger
Her finner du en veiledning for hvordan du oppretter en helt ny lønnsart. 
Vis hele artikkelen
06-03-2018 15:25 (Sist oppdatert 15-07-2019)
  • 0 Svar
  • 0 Liker
  • 1987 Visninger
  For at Payroll skal kunne ta hensyn til korrekt datostyring og retroaktive endringer, er det viktig å ta stilling til om Payroll skal utbetale lønn ut i fra arbeidsdager eller kalenderdager.   På Employees / Innstillinger / Selskapsinnstillinger kan man velge delberegningsmetode. Du får opp to valg i listen, arbeidsdager og kalenderdager. Velger du arbeidsdager så Visma.net Payroll beregne faktiske arbeidsdager i måneden, men velger du kalenderdager vil den regne alle dagene i en måned.    Valget vil påvirke ansatte som starter / slutter midt i en måned, og tilfeller hvor en datostyrt lønnsart legges inn som en transaksjon fra en gitt dato.    Eksempel 1: Juli har totalt 21 arbeidsdager og 31 kalenderdager. Begynner den ansatte 11. juli, med en fastlønn på 60 000,- så vil beregningen for fastlønn bli slik:   Arbeidsdager:   Fastlønn / arbeidsdager i juli * faktisk jobbet arbeidsdager i juli= fastlønn i juli 60.000,- / 21 * 15 = 42.857,-   Kalenderdager:   Fastlønn / kalenderdager i juli * faktisk dager i juli fra begyntdato = fastlønn i juli 60.000,- / 31 * 21 = 40.645,-   Eksempel 2: Begynner derimot den ansatte 16. oktober, hvor oktober har 22 arbeidsdager og 31 kalenderdager, blir forskjellen mellom arbeidsdager og kalenderdager som følger:   Arbeidsdager:   Fastlønn / arbeidsdager i oktober * faktisk jobbet arbeidsdager i oktober = fastlønn i oktober 60 000,- / 22 * 12= 32 727,-   Kalenderdager:   Fastlønn / kalenderdager i oktober * faktisk dager i oktober fra begyntdato = fastlønn i oktober 60 000,- / 31 * 16 = 30 968,-     Det er med andre ord viktig å ta en vurdering av hvilken delberegningsmetode som skal benyttes. I disse tilfellene skilles det ca. 2000,- på bruk av arbeidsdager og kalenderdager. Dette vil variere ut i fra hvilken lønn den ansatte har, men eksemplene over viser at det kan utgjøre store beløp både for firma og for den enkelte ansatte.   Husk at hvis du skal endre dette etter at en eller flere lønnskjøringer er utbetalt fra Payroll, bør du legge på dato for når endringen skal gjelde fra (dvs. ikke "bruk eksisterende gyldig fradato"), slik at innstillingen ikke medfører rekalkulering tilbake i tid for ansatte som allerede kan være påvirket av innstillingen.
Vis hele artikkelen
28-09-2017 16:05 (Sist oppdatert 29-09-2017)
  • 0 Svar
  • 0 Liker
  • 3179 Visninger
Her følger en oversikt over kontoene som ligger i Mamut Standard Kontoplan i Payroll, samt knytningen mot kontotyper.
Vis hele artikkelen
19-09-2017 13:33
  • 0 Svar
  • 0 Liker
  • 1882 Visninger