Releases YouServe

27-08-2021404 error when clicking on a task from My Tasks in Portal (Change 2898415)If you clicked on a task in the menu: “My tasks” in Portal, you could get a 404 error and not open and handle the task. This has now been resolved.25-08...

30-03-2021 HRSS link added automatically when sending an email with an empty footer (change 2244213) When the footer - created in an email template - was empty, the system automatically added a link to Youforce. The link to Youforce will n...

Notifications Online release sessions Why  Customers have sent us feedback requesting online release sessions in addition to the Release Notes, in which we explain the changes in more detail. We are happy to facilitate this. How Starting with the March release, we will pilot a one-hour info session in the week following the release, which we will use to further explain the most important changes. During these sessions, we will pay extra attention to what you, as a customer, need to do in order to get the most out of modified functionalities. We hope that this will clarify the Release Notes and the Actions listed for some of the changes. The first release session will take place on Tuesday, March 2, at 14:00 (CET). We will let you know how to sign up for the release session via the Community as soon as possible. Modified and Improved Values 0 and 9 added to Gender field (2265398) Why The Gender field did not meet the legal requirements for gender values. These requirements state that, in addition to the values 1 (male) and 2 (female), the values 0 (unknown) and 9 (unspecified) should also be available. The Dutch tax authority’s Payroll Tax Manual (Dutch: Handboek loonheffingen) explains when the values 0 and 9 may be used. How Employee > Employee > Employee(s) With effect from January 1, 2021, the values 0 (unknown) and 9 (unspecified) have been added to the Gender field, so that you now have four options to choose from.  You may also choose to deviate from this and only use the values 1 (male) and 2 (female). To do so, you can simply remove the two new values from the list of values. New error signal A new error signal has been added that will appear in the Signal Report if you enter an invalid value in the Gender field: 0202 – Gender code value not equal to 0, 1, 2, or 9. Action If you do not wish to use the two new values for the Gender field, you can remove them from the list of values. To do so, go to Settings > Recording > List of values If the new error signal appears in the Signal Report, adjust the value in the Gender field. If you do not do this, the value will be rejected in the wage tax return. External Changes Processing Report improved Why In previous Release Notes, we announced that we were working on improving the performance of our various reports. In this release, we have improved the performance and readability of the External Changes Processing Report. How Manage > External changes > Process External changes After importing the external changes, the External Changes Processing Report will automatically appear in My reports, as before. The extension of the report has been changed from .xls to .xlsx to make the report easier to read. This means that the columns are no longer merged and that the report is now divided into the following tabs: Parameters Import validation Changes validation Action No action is required. Newly created reports will automatically have the new layout. Imported Changes Processing Report improved Why  We are working hard to improve the performance and readability of our reports and, where possible, making other small improvements. How  Manage > Import/Export > Import CSV We have made the following improvements: The description of the import file has been changed. Instead of a general message stating that you have imported a report, you now see the name of the import definition so you know which definition the import was based on.  The format has been changed from PDF to Excel. If there are any errors, they are listed on the first tab of the Excel file. The parameters are on the second tab. Action No action is required.  Unique Personal ID and Identity must consist of at least two positions or characters Why To connect to the Raet Portal, the Unique Personal ID (UPI) and the Identity must consist of at least two positions or characters. That is why, as of this release, you can only enter a value of at least two positions in the Unique Personal ID (UPI) and Identity fields.  How Employee > Inflow/Outflow > Create employee Employee > Employee > Employee(s) Employee > Employee > Employee (supplementary) As of this release, you can only enter a value of at least two positions in Unique Personal ID (UPI) and Identity fields. If you enter a value of one position, an error message will appear. If you previously used values of one position, you can add a leading zero. Action If your own administration still contains employees with a UPI or Identity of one position, we advise you to change these into values of at least two positions.  Solved Messages Organization structure produced error (2426604) Message Previously, if you created a new Organizational Unit (OU) with a reference date and then went back to the full list with an earlier reference date, the future OU would also remain visible. If you then tried to open this OU, an error message would appear because the OU did not yet exist on that earlier reference date.  Solution  The software has been modified. From now on, OUs created with a reference date after the reference date used to generate the full list are no longer visible on this list. Action No action is required. New Year’s Day not included in Presentation Schedule for Public Holiday Cluster (2368625) Message Settings > Work pattern > Presentation Schedule In the Presentation Schedule for employees, New Year’s Day was not marked as a holiday. Leave taken was processed correctly – no hours were booked, but the presentation was not correct. Solution  This has been resolved, so that from this release on New Year’s Day is shown correctly as a public holiday in the Presentation Schedule.  Action No action is required. Not able to save leave schemes when the Label overview and/or Color overview fields were filled in immediately (2394160) Message Settings > Leave > Leave scheme When you assigned a leave type to a leave scheme for which you had immediately completed the Label overview and/or Color overview fields, you were not able to save the leave scheme: an infinitely spinning circle would appear. Solution As of this release, this issue has been resolved and you can save the leave scheme, even if you immediately filled in the Label overview and/or Color overview fields. Action If there are any leave types for which you were unable to enter the label or color before, you can do so now.  Leave period in Leave balance screen sometimes incorrect (change 2399456) Message  Employee > Leave > Leave balance The Leave balance screen sometimes displayed incorrect leave periods.  Solution As of the February release, this issue has been resolved and you will see the correct Leave period. Action No action is required. Publishing Date : 1/21/2021

Notifications Datacenter move on 1, 2 and 3 October Data regarding employees, salaries, employments etc. that are entered daily are stored in our datacenter. The current location will be closed down and the datacenter will be moved at the beginning of October. When will the move take place? All the data will be moved to another location from Friday 1 October 2021, 06:00 pm until Sunday 3 October 2021, 08:00 pm. During this period the applications in the Youforce portal will not be available. The period has been carefully selected: after the monthly peak of changes, after the summer and after the salary payments. What are the consequences? During this period the Youforce portal and all the Youforce applications are unavailable. All the applications are available again as of Sunday 3 October, 08:00 pm. We will keep you informed and will remind you about this move regularly. We have also posted frequently asked questions. These can be viewed and downloaded using this link Is your question not included? Ask it through 4ME: select the Youforce (Portal) service and use Datacenter as the subject. Activating the Person level When preparing activation of the Person level we recommend taking the following steps: Steps for activating the Person level Create the Proposed UPIs Select Reports > Check > Proposed UPIs. If the Proposed UPIs report contains conflicts based on current data, these should be resolved first. For example, you can correct or modify data of a larger group of employees by importing a file with the correct data.  Conflicts result in failures that have to be corrected manually. Contact the Service Desk or a consultant if you require further information.  Create the Proposed UPIs report again. When there are no more conflicts, the Activating Person level request can be submitted using ITRP/4ME. Add the Proposed UPIs report (that does not contain conflicts).   Note: the Product Development department will not process the request if this report is absent. Specify the number of employees of the client. Specify the desired start date. The request will be discussed within a period of one week and planned in one of the biweekly services. Correct data in case of failures. The Product Development department will inform you and the consultant about any failures and what should be corrected. Note: in case of failures you or the consultant must correct the data. Note: conversion and synchronization of persons to other employees may result in the submittance of large volumes of additional data to Datawarehouse, Management Information and/or third parties of the client. That is why clients must inform all parties involved about activating the Person level. The same applies to the consultant. New Person overview When the Person level is used in the application, an overview can be created as of this release of all the persons that have been created and the employees that have been linked to them. This is the Person overview report.   How  Tenant level - Reports > Check > Person overview As a person is registered directly below the tenant level, persons and linked employees of all companies are included, depending on the specified settings. All the employees that are linked to the persons in the overview are displayed. More information is available in the online Help. Note: in the online Help of Release 2021-09 the name Person layer report is used instead of Person overview. The information in the online Help is available by selecting Screens and fields > Reports > Check > Person layer report. The Help text describes the Person overview.  As of Release 2021-10 the name Person layer report will have been changed to Person overview in the online Help.  Action No action is required. Modified and Improved The Upload external changes file and Process external changes screens have been improved Why  The Upload external changes file and Process external changes screens did not clearly show whether a file was still in the queue, had been processed or was being processed. That is why the Status column has been added to the overview of both screens. The Process external changes screen now also includes the Last processing column. How Management > External changes > Upload external changes file > Process external changes As of this release the Status column in the Upload external changes file and Process external changes screens contain the following information: Ready Ready with errors File not processed The Last processing column in the Process external changes screen shows when the file has been processed. In combination with the Start processing column it is clear if a file is being processed or when it has been processed. More information about the added columns is available in the online Help. Action No action is required.  Selection options in Proposed UPIs report have been modified Why The Only employees with UPI filter option is now available in the Proposed UPIs report to include only employees who already have an UPI. With this option the Proposed UPIs report only contains conflicts and remarks for employees who actually have a UPI. How Reports > Check > Proposed UPIs The Only employees with UPI option has been added to the Proposed UPIs screen. If you do not want to assign a UPI to all employees or do not want to link all of them to the Person layer, this option can be selected in order to not include conflicts or remarks based on the proposed UPI. By selecting this option it becomes clearer which employees actually have a UPI. Note: which employees are included in the report, with or without conflicts and remarks, also depends on the selected employee selection. Action No action is required.  Duplicate sick reports were added when importing consultant’s Excel file Why When an Importing absence file was read in the Import Excel file (Consultant) screen that inadvertently contained duplicate sick reports, the Sick leave screen showed two lines with active sick leave. However, only one sick leave is allowed per contract. In the Sick leave screen it is not possible to enter a new sick leave for an employee with an active sick leave because the system checks for this and an error message will be displayed. When importing sick leave this check was not performed, resulting in duplicate sick reports with the same start date. How Management > Import/Export > Import Excel file (Consultant) Employee > Illness > Sick leave The software has been modified to ensure an Importing absence file with duplicate sick reports no longer results in duplicate active sick reports when it is read using Import Excel file (Consultant). We have also made sure this is not possible through other channels for reporting sick leave, such as API and HR Self Service. Action No action is required. Translations of Nature of illness, Reason for leave and Type of leave list of values Why The registration of translations of the Nature of illness, Reason for leave and Type of leave list of values has been improved. Colleagues using the English or German version will notice this in various screens, such as Request for leave and Sick leave. From now on you can also easily see which translations are applied and you can change these as well. How Settings > Recording > List of values (with inheritance) The Language field has been added to the List of values with inheritance screen. When a value in the list has a description in one language but not in the other, the description is displayed as a technical number, such as #10040506#.   The values in this list at the Dutch level have already been translated by Visma. Action If specific values were added to the list for your organization in the past, this may have been done at the Client or Company level. When you have colleagues who use the application in another language, check the descriptions of the list of values in the desired languages. Use the Edit  button to change any technical numbers into useful descriptions. Solved Messages Dutch (Belgium) language option has been removed  Message It was possible to specify the Dutch (Belgium) language for employees. As a result incorrect descriptions could be included in the payslip and the annual statement. Solution Employee > Employee > Employee (supplementary) Employee > Employee > Employee The Dutch (Belgium) value in the Language field (data element number 10) has been removed from the selection list. Already registered values have automatically been replaced by Dutch. Action The corrected employees can be checked using the Change report using the following filter: Data element = Language Modified by = RPD Technisch beheer Publishing Date : 8/20/2021

New New Terms of employment for Belgium Why  As of this release, two new terms of employment are available for recording information that companies based in Belgium may need: Terms of employment Belgium and Suspensions Belgium. These terms of employment are only intended for registering this information. The data you record in these screens is not be used for salary processing.  How Settings > General > Term of employment clusters As of this release, you can add the Terms of employment Belgium and Suspensions Belgium terms of employment to a terms of employment cluster by using the Terms of employment cluster function. Enable the Auto selection option if you want these terms of employment to be added by default when assigning the terms of employment cluster to a new employee. Employee > Contract > Terms of employment Use the Terms of employment screen to link the new terms of employment to an employee. Action If you wish to use these new terms of employment, add them to the terms of employment cluster or link them to the relevant employee(s).  Modified and Improved More information on the Leave balance screen Why Customer feedback indicates a need for more information on the Leave balance screen, such as the employee’s date of birth and leave scheme, and the reason for a leave request.  How Employee > Leave > Leave balance As of this release, the following information has been added to the Leave balance screen. At the top of the Leave balance screen, the date of birth and the applicable leave scheme. The Reason column, where you can see why a leave request was submitted. Action No action is required. Improved performance of Leave balance overview per month report and Collective leave report Why In previous release notes we announced that we were working on improving the operational reports, starting with leave reports. Release 2021-01 includes improvements to the final two leave reports: Leave balance overview per month and Collective leave. The functionality of these reports has not changed. How Settings > Leave > Collective leave Settings > Leave > Leave balance overview per month Generating reports is now faster. If you run the Leave balance overview per month report, you will see that Excel is the default value in the Save as field. If necessary, you can change this value to PDF. Action No action is required. Raet HR interfaces > Youforce users extended Why It would be convenient if administrators could arrange for the UPI to be included in the Youforce users extended interface so that the Youforce portal can use it to provide Identity and Access Management (IAM) services based on the unique personal identification (UPI). How Settings> Data exchange> Raet HR interfaces > Youforce users extended interface  The UPI required option has been added to the Youforce users extended interface. If this option is enabled, only those employees will be sent to the portal that have a completed Unique Personal ID (UPI) field. Action If you only want to send employees with a completed UPI field to the Portal, check the UPI required option to enable it. Organizational Unit - Sorting search field to look up manager Why If you had enabled the Search by employee code option at the bottom left of the general screen in User settings , the manager look-up in organizational units feature had not yet been adjusted accordingly and the system still showed the Company field first. We have now made the appropriate software adjustments in this release based on user feedback. How User settings  If you have enabled searching by employee code in the User settings, from now on you will see the employee code as a search parameter instead of the company when searching for the manager in an Organizational unit. Action No action is required. Import sick leave optimized Why It would sometimes take a considerable amount of time to collect all required data when importing sick leave before the entire file was finally processed. This caused an unnecessary interruption in the process when importing multiple files. We have now optimized the import process to resolve this inconvenience.  How We have adjusted the procedures for collecting data during the import to reduce file processing time, meaning imports in HR Core Business are now processed faster. The time savings will be especially noticeable when importing smaller files. Action No action is required. Solved Messages Unlink profile from Profile group Message If you had added a Profile to a profile group and you wanted to remove this profile from this profile group on the same day (e.g. because it was incorrectly linked), the system would not save the change and this profile would remain linked to the profile group after saving. Solution Settings > Recording > Profiles This has been resolved. You can now remove a profile from a profile group on the same day as you added the profile.  Action As of this release, you can remove profile groups that were incorrectly linked from a profile group on the start date. Unknown Organizational unit codes in CSV for employees who were transferred via import (1839613)  Message When exporting the Organizational unit (OU) codes via Export CSV, the file showed strange OU codes instead of the OU codes that were imported and visible in the Employment contract screen.  Solution The strange OU codes only appeared in very specific cases, in which only the code was requested in a report. There was no problem when requesting a report with the OU description. This problem has been resolved as of this release. Now, the Export CSV report displays the correct OU code, which is linked to the employee. Action No action is required. Nationality code table was not up to date (2309997) Message The nationality code table did not match the tax administration’s current codes for 2020. As a result, it was not always possible to record the correct nationality in accordance with the official list.  Solution We have adjusted the nationality code table to reflect the tax administration’s official list for 2021. This means that some nationalities are no longer visible, that the description of a number of nationalities has been changed, and that new nationalities have been added. Action We have informed all customers who have entered these nationalities for employees so that they know what they need to change as of 1-1-2021. This change has no direct impact on other HR Core Business users. Memo field in Pregnancy and maternity leave (WAZO) screen generated an error (2270912) Message Adding text to the memo field when saving an illness report resulted in an error message. You could only add text to the memo field after you had saved the illness report. Solution Employee > Leave > Pregnancy and maternity leave (WAZO) This has been resolved. You can now add a memo in the Pregnancy and maternity leave (WAZO) screen without saving the illness report first. Action No action is required. Publishing Date : 12/23/2020

12-05-2021 Improved filtering in Workflow definition overview (change 498602) In Settings/ Workflow definition overview, on the Active, Completed, and Authorisations columns the filtering results will match exactly the filled value. 07-05-2021 Er...

Notifications Again - Duplicate sick reports were added when importing consultant’s Excel file The September release notes included this message about incorrect addition of duplicate sick reports as described below. Due to a problem with this modified functionality we have revoked the modification on 30 August 2021. The modification has now been improved and will again be available in the October release. Why When an Importing absence file was read in the Import Excel file (Consultant) screen that inadvertently contained duplicate sick reports, the Sick leave screen showed two lines with active sick leave. However, only one sick leave is allowed per contract. In the Sick leave screen it is not possible to enter a new sick leave for an employee with an active sick leave because the system checks for this and an error message will be displayed. When importing sick leave this check was not performed, resulting in duplicate sick reports with the same start date. How Management > Import/Export > Import Excel file (Consultant) Employee > Illness > Sick leave The software has been modified to ensure an Importing absence file with duplicate sick reports no longer results in duplicate active sick reports when it is read using Import Excel file (Consultant). We have also made sure this is not possible through other channels for reporting sick leave, such as API and HR Self Service. Action No action is required. Person level improved – Identity now processed in the same way as UPI We made the following functionality available on 1 September 2021. Why When an employee is hired, the system can determine whether it concerns a new or a returning employee. With a new employee the system assigns a new UPI or Identity. Identity (7013) is used to identify the user in the portal. Unique Personal ID (UPI) (7014) is used to identify a person and can also be used when the person level is not used. With a returning employee the system used to assign the old UPI but not necessarily the old Identity. This resulted in problems in the portal and other systems. That is why the system now processes the UPI and the Identity in the same way. How To enable the system to process the UPI and the Identity in the same way, the software has been modified as follows.  Settings > Recording > Parameters UPI As of 1 September 2021 the name of the Parameters UPI screen has changed to Parameters UPI/Identity. The Fill Identity with field has been added to specify what the employee’s Identity field should contain. When the employee’s Identity is already known in the system, i.e. a person with an Identity already exists for the UPI, the known Identity is used. Note: the preference specified in the Fill Identity with field for Identity applies when a new Identity has to be created. The Fill Identity with field has the following values: Generate automatically The Identity field is to be specified by the system automatically. With this option the Sequence number field and the Leading zeroes option are displayed.  Enter a sequence number if the Identity that is automatically generated should be based on this sequence number +1, this sequence number +2, etc. If the Leading zeroes option is selected, the Total length field is displayed and the leading zeroes are added to the automatically generated Identity up to the maximum length specified in Total length.  Use employee code The Identity field will automatically be filled with the employee code. Use employee UPI The Identity field will automatically be filled with the UPI. Use Identity preference The Identity field will automatically be filled with a preference value. This field will be made available through Self Service. For example, Email address or a value from the organization’s free fields. This field can be modified through an import. When nothing is entered here, the Identity field will remain blank. When Use Identity preference is selected in the Parameters UPI/Identity screen, the Identity preference field can be changed in HR Core Business, or the value will be entered through Self Service when the 10526800PS category is included in the Self Service workflow/processes. In all other cases the Identity preference field remains blank and cannot be changed in HR Core Business. Inflow/Outflow > Create employee Employee > Employee > Employee (supplementary)  The Identity preference field has also been added to the Employee (supplementary) screen and in the Create employee wizard, so it is assured in all our processes. Note: when an Identity is explicitly specified when creating an employee using Self Service category 7013PS, that value will be adopted in HR Core Business without validation. Validation will take place during processing. When in the Parameters UPI/Identity screen it has been specified that the Identity should be assigned automatically, the Identity field can remain blank. The Identity will then be assigned automatically. Action Specify your option in the Fill Identity with field in the Parameters UPI/Identity screen with the required start date to ensure one method is used for the Identity throughout the organization. Include category 10526800PS in the Self Service processes if the Identity preference field is to be used.  Modified and Improved GDPR – Some data was wrongly synchronized between Person level and Employee level Why Some data was wrongly synchronized between the Person level and the Employee level. Some of the data has to be removed or anonymized to comply with GDPR. How  The data that was wrongly synchronized between the Person level and the Employee level has been removed from the synchronization process. The data that had to be removed or anonymized to comply with GDPR has later been added and will be properly removed or anonymized as of the October release. Action No action is required. Work schedule can now be generated for a period longer than 2 years Why Up till now work schedules could only be generated for a maximum period of 2 years. Where parental leave is concerned, for example, work schedules for a period longer than 2 years are useful, which is why as of this release a work schedule can be generated for a longer period. How Settings > Work pattern > Generate work schedule As of the October 2021 release a work schedule can be generated for a maximum period of 4 years. Action No action is required.  Solved Messages List of values only consisted of 20 pages (2851105) Message  The List of values screen only showed a maximum of 20 pages. When the list of an Element consisted of more than 20 pages it was not possible to view all the values.  Solution This has been resolved and as of this release the List of values screen includes more than 20 pages. Action No action is required.  HRSS parental leave failure (2848055) Message  It was not possible to request parental leave with a start date that equaled the date of employment.  Solution The software has been modified and as of this release it is possible to hire an employee on, for example, 01-10-2021 and request parental leave as of 01-10-2021. Action No action is required. Publishing Date : 9/21/2021

Notifications Translated screens Some of the HR Core Business and Payroll Business screens have been available in English and German so far. However, we are receiving more and more requests to make the application fully available in other languages. In the course of this year, we plan to translate more screens: HR professional screens will be translated into English, German and French. Screens for payroll professionals and other users will be translated into English. As of this release, a large part of the screens of the Employees menu has been checked and translated. The other menu options will follow in the coming releases. Once this menu is fully translated, we'll let you know. Note Some fields have a list of values defined at the Client or Company level. In this case, you administer the list and the translations. You can maintain the list at Settings > Recording > List of values  New New field - No Risk Policy applies Why To make the WAO/WIA registration easier, we have added the No Risk Policy applies field to the WAO/WIA registration screen as of 1-1-2021.  How Employee > Illness > WAO/WIA registration. You can enter yes or no in the No Risk Policy applies field. The field is also included in the data integration package for upload to Medical Leave Management. Action No action is required.  Modified and Improved  Employees with the same Start and End date of employment were not sent to Youforce Portal (1631185) Why If an employee was given the same End of employment date as Start of employment date, the End of employment date was not sent to the Youforce Portal. As a result, the End of employment date did not appear in the underlying systems. How As of this release, if you enter an End of employment date for an employee that is the same as the Start of employment date, the End of employment date will be sent to the Youforce Portal and then on to the underlying systems. Action Management > Data exchange > Portal Management Redeliver (employee) To ensure that the data (in this case the End of employment date) is the same in HR Core Business and the Youforce Portal, you can resubmit an employee’s data to the Youforce Portal with the Portal Management Redeliver (employee) function. This will also update the underlying systems such as Management Information. From the June release you can use this link for both the V1 and the V3 link. Digi-ZSM - Report of illness at 42 weeks sometimes not sent to UWV (2594769) Why The report of illness at 42 weeks was not always sent to UWV. How This issue has been resolved. The report is now sent to UWV as usual. Action No action is required. Performance - Occupancy overview in HR Self Service (2705936) Why When requesting the occupancy overview in HR Self Service, it sometimes took an inordinate amount of time before the information was displayed, or it was not displayed at all. How We have implemented improvements in collaboration with HR Self Service so that the information is displayed faster and the screen no longer freezes. Action No action is required. Solved Messages Leave reports in Management Information not aligned with HR Core (2608937) Message  The leave data in the reports in Management Information (MI) occasionally differed from the leave data in HR Core. This was because the leave data was not properly transferred to the MI reports. Solution We provided a solution for this issue on 29 April 2021. See Action what you need to do to ensure that the MI reports show the correct leave data. Action Settings > Grant leave entitlement > select Correct current leave year You must correct the current leave year at company level in HR Core Business to ensure that the MI reports contain the correct leave data. When you correct the current leave year, the data for all previous years will also be corrected. Keep in mind that it may take some time before the current data is available for consultation in the MI reports. It is not possible to grant parental leave in the leave scheme (2695815) Message  Prior to this release it was possible to check the Parental entitlement field for different types of leave within one leave scheme. However, upon saving, the system froze and the change was not saved. Solution From this release, a message will appear if the Parental entitlement field is checked for another type of leave within the scheme.  Action No action is required.  Type of illness in Sick leave screen did not match help text (2713858) Message The list in the field Type of illness did not correspond to the types of illness in the help text on the Sick leave screen. Solution The help text has been adjusted so that the correct values now appear in the explanation of the Type of illness field.  Action No action is required. Leave entitlement cutback - reason not available (2726639) Message It was not possible to record the reason for reducing leave in the Cutback leave rights screen.   Solution This issue has been resolved. You can now indicate the reason in the Reason leave entitlement cutback field in the screen mentioned above.   Action To ensure that the correct reasons appear under Reason leave entitlement cutback, you must choose the value again at Settings > Recording > List of values. After this, you can save the cutback of leave entitlement with the correct reason. Publishing Date : 5/21/2021

Notifications Online release sessions The first release session was organized on Tuesday, March 2 as part of a pilot to explain the March release in more detail. The pilot will be continued during the coming months and a one-hour info session will be arranged in the week following the release to further explain the most important changes. We will devote extra attention to what you, as a customer, need to do in order to get the most out of modified or new features. We hope that this will clarify the Release Notes and the Actions listed for some of the changes. The second release session following the April release will take place on Tuesday, March 30, at 14:00 (CET). We will let you know how to sign up for the release session via the Community as soon as possible. You can also contact your Customer Success Manager. New Job information screen - new Job category field Why It may be useful to indicate which jobs have much in common, which is why the April release will include the new Job category field in HR Core Business.  How Settings > Formation and Organization > Job information As of 1 January 2021 the Job information screen includes the Job category field. It can be used to specify the category a specific job belongs to. The possible values can be specified using the List of values function.  Settings > Recording > List of values > Job information The Job category list of values has been added to the Element field list in the Job information screen. Jobs can be clustered more easily through this list of values. Note: there is no interdependency between the Job category and Job values. The new Job category field will also be added to the Recruiting API that is being developed.  Action If you want to use the new feature, you can create a list of values. If you do not want to use this feature, you need not do anything.  Employee (supplementary) screen - new Candidate ID (ATS) field  Why As of this release the new Candidate ID (ATS) field is available for registering details about the recruitment of an employee.ATS stands for Applicant Tracking System, a generic name in recruitment systems. How Employee > Employee > Employee (supplementary) As of 1 January 2021 the Employee (supplementary) screen in the April release includes the Candidate ID (ATS) field. This is a free field for registering how an employee was recruited (max. 50 characters). Action No action is required.  Sick leave screen - new fields in Additional information tab  Why As of this release the Additional information tab includes two new fields for registering information about sick leave. How Employee > Illness > Sick leave The Additional information tab in the Sick leave screen includes two new fields: Action list: The corresponding list of values can be maintained per client. Brief note: An alphanumeric field for the input of text (max. 100 characters). Settings > Recording > Free fields Create the fields by selecting Settings > Recording > Free fields. These fields can then be selected for all screens and added using Settings > Recording > Expand screen. All the added extra fields are included in the Extra information panel. The new fields are included in the MLM domain API. This means that the fields can also be used in Medical Leave Management. Action No action is required.  Solved Messages Updating person fields when creating a new employee Message When creating a new employee where the person layer has been activated and the person has already been created, the following may occur: If a person had been created with, for example, House number suffix and a new employee was created without House number suffix, the House number suffix was sometimes not removed for that person. Solution This has been resolved. The fields are now correctly updated when a new employee is created. Action No action is required. No scrollbar in Expand screen function (change 2511657) Message Settings > Recording > Expand screen When the number of screen elements added through the Expand screen function is so large they cannot all be displayed on the screen, no scroll bar was available to view the remaining added elements. Solution Following this release, a scrollbar is displayed when there are more elements that can be displayed on the screen.  Action No action is required. Leave balance incorrect (change 2591261) Message Sometimes the leave balance was set to 0 following recalculation. Solution This has been resolved as of this release.  Action No action is required. Leave year presentation error (change 2486514) Message Settings > Leave > Grant leave entitlement Sometimes the leave year was presented incorrectly when executing the New leave year action. Solution This has been resolved; as of this release the leave year is presented correctly again.  Action No action is required.

Solved Messages Base of employee master data - salary rounded to one decimal (2762418) Message The salary is rounded to 1 instead of 2 decimals in the Base of employee master data. Solution This has been resolved. As of this release, the salary is rounded to 2 decimals. Action This can be checked by selecting Employee > Employee > Base of employee master data. Closed organizational units wrongly forwarded to Portal (1253731) Message Sometimes the following error message was displayed in the Grouped User Management Logbook in the Portal: Role assignment Manager not processed: Organizational unit xxxxx not found. The managers of organizational units (OUs) that were already closed were mistakenly specified for the closed organizational units. Solution As of this release, no data of already closed organizational units is forwarded and the error message is no longer displayed. As a result, the Grouped User Management Logbook is more structured and any errors can be detected more easily.  Action No action is required. Employee is not forwarded to the Portal (2710118) Message Synchronization between the Person entity and the Employee was not always successful. Employees for which the Identity and/or Citizen service number fields had no value were not synchronized with the persons in question, and the employees were not forwarded to the Portal. Solution This has been resolved. The order of synchronization from the Person to the Employee is now correct and the employee is forwarded to the Portal. Action No action is required. Long-term illness and maternity leave - value of PIB date field incorrect (389486) Message Calculation of the PIB date field (Permanent Incapacity Benefit (Restrictions) Act (Wet Verbetering Poortwachter)) was incorrect when there was a period of maternity leave between two sickness registrations, as a result of which the second sickness registration was not marked as continuous. Solution A sickness registration is continuous when the period of recovery between two sickness registrations is less than 28 days. As of this release, the maternity leave period is no longer included when determining these 28 days. In the above situation, the second sickness registration is now considered to be continuous and the PIB date field will show the correct date. Action The maternity leave period is now considered where new sick reports are concerned. Already registered sick reports are not automatically modified. To ensure the correct PIB date of existing sick reports is calculated, the sick report following maternity leave must be removed and re-entered. Generating mail merge documents no longer works (2783083) Message In the Employee address details screen, the (mailmerge) indication was not visible at the aggregate fields for the mail merge address. As a result, mail merge documents could no longer be created.  Solution The (mailmerge) indication has been re-added to the following fields: Street / House number (mailmerge) (7569) Postcode / City (mailmerge) (7570) Country (mailmerge) (7568) Action No action is required. Publishing Date : 6/17/2021

Notifications Online release sessions  Several customers requested that we organize an online release session in addition to the Release Notes to explain the changes in the relevant release in more detail. We are happy to facilitate this. As we already mentioned in the February Release Notes, we will pilot a one-hour info session in the week following the release, in which we will further explain the most important changes in the release. During this session, we will devote extra attention to what you, as a customer, need to do in order to get the most out of modified or new features. We hope that this will clarify the Release Notes and the Actions listed for some of the changes. The first release session will take place on Tuesday, March 2, at 14:00 (CET). You can register via de Event calendar of Payroll Business. New ‘Payslips to Dynamic Payslip' interface not yet active  We are creating a feature allowing you to offer your employees dynamic payslips. At present, the Management - data exchange - interfaces screen already displays the new ‘Payslips to Dynamic Payslip' interface. The new interface is only displayed however; it is not yet available. We will provide more information in the next release.  Solved Messages Cannot read UPIs (2486778) Message  We have found that in some situations, the system cannot read the UPI if an employee is associated with two dates of birth in the system. The cause is a modification of a date of birth as per a different benchmark date. A retirement date is calculated for every date of birth and this generated an error message. Solution We have adjusted the code as per the March release, ensuring that UPIs are read without generating an error message. Should one employee be associated with two (different) dates of birth, the dates are copied to the person in chronological order. Action No action is required. Leave across year change with introduction of Wet Wieg (2179372) Message  It is impossible to take childbirth leave that falls in two calendar years because the system states there are insufficient remaining days of leave. Solution As per the March release, you can take supplementary childbirth leave across a year change. Action If you have not yet applied for supplementary childbirth leave across the year change, you can do this now. Otherwise, no further action is required.  Contact 2 is not deleted (2441425) Message If an employee stated through Self Service that two of their contacts had to be removed, a failed change resulted.  Solution After the March release, the change for deleting a second contact will be processed and not end up with the failed changes.  Action No action is required. Publishing Date : 2/19/2021

Notifications Webinar Visma | Raet Dynamic Payslip – Invitation Date: 06 May 2021 Time: 01.00 pm to 02.00 pm This webinar provides an introduction to Visma | Raet Dynamic Payslip. We review the current payslip (PDF) and the options available with an interactive payslip. We would also like to receive feedback on the look & feel of Visma | Raet Dynamic Payslip.  Sign up Would you like to attend this webinar? Go to the Payroll Business Community at Events, click Webinar Dynamic Payslip and sign up. You will receive an email with the login details on the Monday preceding the webinar. Modified and Improved Proposed UPIs report has been modified Why  The Proposed UPIs report now includes additional checks to check and correct data before the Person level is activated. How  The following checks have been added: Check if BSN has less than 9 characters When a BSN has less than 9 characters, the Conflict / Error column contains an error message and the Remark column contains the text: BSN has less than 9 characters, please modify. Check of zip code format When the format of a zip code is incorrect, the Conflict / Error column contains an error message and the Remark column contains the text: Zip code is incorrect, please modify. Action No action is required.  Solved Messages Clearing Manager field using Import CSV was no longer possible (2033007) Message  It was no longer possible to clear the Manager field in the Employee(s) screen by importing a CSV file with the #NULL# value. This action is performed when the manager has been specified manually and the field has to be populated with the actual manager from the organizational structure. Solution This problem has been resolved. As of this release the Manager field can be cleared again by importing the #NULL# value. When this value has been imported, the manually specified manager is removed and the value from the organizational structure is adopted. Action If multiple managers have to be removed in one go, this can be done by importing a CSV file. Problem with changed date at Organizational units HRCB (2608435) Message When a reference date is entered in the Organizational unit’s main screen and next the Organizational unit that is to be changed is selected, the reference date is reset to the first day of the period instead of retaining the date selected in the first screen.  Solution Settings > Formation and Organization > Organizational units This problem has been resolved. The reference date selected in the first screen is now retained in the subsequent screens. Action No action is required. Option temporarily removed from menu Message Sometimes a specific option was not visible in the menu during a single day. For example, the Employment contract option on 31 December 2020. The data elements included in that screen, however, were included in reports and could be changed using Management > External changes. Solution The software has been modified and the options are now always included in the menu. Action No action is required.  Publishing Date : 4/23/2021